POWERED AIRE, INC.

Commercial/Industrial Air Curtain Division

General Information
General Information
Company History Air Curtain Fundamentals Advantages Selection Guide Typical Applications
 

 

Advantages

SPECIAL PLENUM DESIGN
CED, BCE, BCT, ETD, TSD, EHD, LDC, HDC, LDX, HDX, CHS, THS, TIG, & TDG

The use of plenums in our aire curtains makes the air flowing out of the discharge more uniform across the entire length of the nozzle. Most of our competitors aim the discharge of each blower directly down and the air flows right out of the nozzle. These blowers cannot be placed directly beside each other since the return air enters from the sides. There are also motors in between the blowers spreading them out further. When the blowers force air directly out of the discharge of the air curtain, there will be dead spots wherever there are spaces between the blowers.
In Powered Aire's units, the air coming out of the blowers is pointed toward the back of the aire curtain. Here it fills a specially designed plenum. When the plenum is pressurized, the air is then forced out evenly across the entire length of the plenum discharge.
 
         
     
  Traditional Air Curtains   Powered Aire Air Curtains  
         

Another benefit of this design is a reduction in the noise level. Some of the noise generated by the turbulent air being discharged from the blowers that can be heard in our competitors' models is absorbed by the plenum. The air discharged from the plenum is more evenly dispersed across a larger cross-section, drastically lowering the sound pressure levels.

STAINLESS STEEL AND COMPETITIVELY PRICED
MP, CED, BCE, BCT, ETD, TSD, EHD, LDC, HDC, LDX, HDX, CHS, THS, TIG, & TDG

Another advantage of using Powered Aire air doors is that every aire curtain we manufacture is constructed of stainless steel. We still remain competitive with other manufacturers who make their units out of plastics, painted steel, or aluminum by avoiding costs associated with expensive molds, disposing of chemicals, maintaining a paint booth, extra labor, and being environmentally friendly. Along with being corrosion resistant, stainless steel also gives our air doors an aesthetically pleasing look. The reflective properties of the metal allow our aire curtains to blend in with the architecture by mirroring the color of their surroundings.

NO EXTERNAL MOUNTING HARDWARE
MP, CED, BCE, BCT, ETD, TSD, EHD, LDC, HDC, LDX, HDX, CHS, THS, TIG, & TDG

Another advantage of Powered Aire aire curtains is the way our units are mounted. Each unit comes with integral top and wall mounts so that for standard installations no external hardware needs to be installed or purchased.

 

 

 
Commercial Air Curtains
Industrial Air Curtains
Installation Photo Album
Maintenance Support
Rep Finder
Contact Us
Request Catalog
Engineering Tools
 

Powered Aire, Inc.  © Copyright 2000-2007 All Rights Reserved